UPGRADING THE WATERPROOF AEGIS VAPE MOD VIA USB:
Some of the fixes these firmware updates offer:
1.Fixed the issue of 10s overtime cutoff safety feature.
2.Modify Fahrenheit adjustment unit, from 10 degrees Fahrenheit to 5 degrees Fahrenheit.
3.Added Stealth mode, press and hold the 3 keys simultaneously for 2s to enter or exit the Stealth mode.
4.NEW/OLD Coil question optimized
5.Sleep Mode changed from 2 mins to 10 minus
6.Temperature Control slightly improved
7.Resistance lock added
8.Accuracy of Battery Power Display
9.Other Funtions Optimized
10.Including new firmware information (Turn off mod , then press “+” “-” together )
11.Accuracy of Bypass Mode initial voltage Optimized
12.Including auto-identify atomizer function
13.Corrected TCR coefficient of SS coils from 0.00091 to 0.00096
14.Corrected the Calculation method of initial resistance, more accurate .
15.Corrected the high resistance notes, it shows “Ohms too high” with bypass mode; it shows “Ohms too high, Plz lower wattage” with other modes
16.Corrected the notes when battery weak, it shows “battery weak” with bypass mode; it shows “Battery weak, plz lower wattage” with other modes
17.Device still work with high resistance
18.Corrected the conflict of high resistance and “10s cut off ” display
19.Default resistance to identify high resistance under TC mode
As you can see, updating your Aegis Firmware is quite important, as issues with the device have been brought to the attention of Geekvape, they have been releasing updates to fix those issues to ensure the safety of customers! In order to update your Aegis 100w Mod, you will need a Windows based operating system (Geekvape is working on compatibility with Apple products) and Zip software to unpack Zip file once downloaded (i.e. WinZip, WinRar, 7-Zip, etc.)
Steps to update:
1. Remove the atomizer and battery from the device;
2. Plug Micro USB cable into your Personal Computer (PC, laptop, etc.);
3. Press and hold the “power button”, while plugging in the Micro USB cable to the device;
4. Download the most recent version of the Aegis Firmware, open and unpack zip file to Windows
Desktop, run/open Aegis upgrade firmware by double clicking the executable file (.exe), start
installation;
Attached: 20190418_143100.jpg (4160x2080, 3.41M)